Add redis.conf

7 vuotta sitten · a7df9da416
--- a/redis.conf
+++ b/redis.conf
@@ -0,0 +1,540 @@
 # Redis configuration file example

 # Note on units: when memory size is needed, it is possible to specify
 # it in the usual form of 1k 5GB 4M and so forth:
 #
 # 1k => 1000 bytes
 # 1kb => 1024 bytes
 # 1m => 1000000 bytes
 # 1mb => 1024*1024 bytes
 # 1g => 1000000000 bytes
 # 1gb => 1024*1024*1024 bytes
 #
 # units are case insensitive so 1GB 1Gb 1gB are all the same.

 # By default Redis does not run as a daemon. Use 'yes' if you need it.
 # Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
 daemonize no

 # When running daemonized, Redis writes a pid file in /var/run/redis.pid by
 # default. You can specify a custom pid file location here.
 pidfile /var/run/redis.pid

 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
 port 6379

 # If you want you can bind a single interface, if the bind option is not
 # specified all the interfaces will listen for incoming connections.
 #
 # bind 127.0.0.1

 # Specify the path for the unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
 # on a unix socket when not specified.
 #
 # unixsocket /tmp/redis.sock
 # unixsocketperm 755

 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 0

 # Set server verbosity to 'debug'
 # it can be one of:
 # debug (a lot of information, useful for development/testing)
 # verbose (many rarely useful info, but not a mess like the debug level)
 # notice (moderately verbose, what you want in production probably)
 # warning (only very important / critical messages are logged)
 loglevel notice

 # Specify the log file name. Also 'stdout' can be used to force
 # Redis to log on the standard output. Note that if you use standard
 # output for logging but daemonize, logs will be sent to /dev/null
 logfile stdout

 # To enable logging to the system logger, just set 'syslog-enabled' to yes,
 # and optionally update the other syslog parameters to suit your needs.
 # syslog-enabled no

 # Specify the syslog identity.
 # syslog-ident redis

 # Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
 # syslog-facility local0

 # Set the number of databases. The default database is DB 0, you can select
 # a different one on a per-connection basis using SELECT <dbid> where
 # dbid is a number between 0 and 'databases'-1
 databases 32

 ################################ SNAPSHOTTING  #################################
 #
 # Save the DB on disk:
 #
 #   save <seconds> <changes>
 #
 #   Will save the DB if both the given number of seconds and the given
 #   number of write operations against the DB occurred.
 #
 #   In the example below the behaviour will be to save:
 #   after 900 sec (15 min) if at least 1 key changed
 #   after 300 sec (5 min) if at least 10 keys changed
 #   after 60 sec if at least 10000 keys changed
 #
 #   Note: you can disable saving at all commenting all the "save" lines.
 #
 #   It is also possible to remove all the previously configured save
 #   points by adding a save directive with a single empty string argument
 #   like in the following example:
 #
 #   save ""

 save 900 1
 save 300 10
 save 60 10000

 # By default Redis will stop accepting writes if RDB snapshots are enabled
 # (at least one save point) and the latest background save failed.
 # This will make the user aware (in an hard way) that data is not persisting
 # on disk properly, otherwise chances are that no one will notice and some
 # distater will happen.
 #
 # If the background saving process will start working again Redis will
 # automatically allow writes again.
 #
 # However if you have setup your proper monitoring of the Redis server
 # and persistence, you may want to disable this feature so that Redis will
 # continue to work as usually even if there are problems with disk,
 # permissions, and so forth.
 stop-writes-on-bgsave-error yes

 # Compress string objects using LZF when dump .rdb databases?
 # For default that's set to 'yes' as it's almost always a win.
 # If you want to save some CPU in the saving child set it to 'no' but
 # the dataset will likely be bigger if you have compressible values or keys.
 rdbcompression yes

 # Since verison 5 of RDB a CRC64 checksum is placed at the end of the file.
 # This makes the format more resistant to corruption but there is a performance
 # hit to pay (around 10%) when saving and loading RDB files, so you can disable it
 # for maximum performances.
 #
 # RDB files created with checksum disabled have a checksum of zero that will
 # tell the loading code to skip the check.
 rdbchecksum yes

 # The filename where to dump the DB
 dbfilename dump.rdb

 # The working directory.
 #
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
 # 
 # Also the Append Only File will be created inside this directory.
 # 
 # Note that you must specify a directory here, not a file name.
 dir /var/redis

 ################################# REPLICATION #################################

 # Master-Slave replication. Use slaveof to make a Redis instance a copy of
 # another Redis server. Note that the configuration is local to the slave
 # so for example it is possible to configure the slave to save the DB with a
 # different interval, or to listen to another port, and so on.
 #
 # slaveof <masterip> <masterport>

 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
 # starting the replication synchronization process, otherwise the master will
 # refuse the slave request.
 #
 # masterauth <master-password>

 # When a slave lost the connection with the master, or when the replication
 # is still in progress, the slave can act in two different ways:
 #
 # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
 #    still reply to client requests, possibly with out of date data, or the
 #    data set may just be empty if this is the first synchronization.
 #
 # 2) if slave-serve-stale data is set to 'no' the slave will reply with
 #    an error "SYNC with master in progress" to all the kind of commands
 #    but to INFO and SLAVEOF.
 #
 slave-serve-stale-data yes

 # You can configure a slave instance to accept writes or not. Writing against
 # a slave instance may be useful to store some ephemeral data (because data
 # written on a slave will be easily deleted after resync with the master) but
 # may also cause problems if clients are writing to it because of a
 # misconfiguration.
 #
 # Since Redis 2.6 by default slaves are read-only.
 #
 # Note: read only slaves are not designed to be exposed to untrusted clients
 # on the internet. It's just a protection layer against misuse of the instance.
 # Still a read only slave exports by default all the administrative commands
 # such as CONFIG, DEBUG, and so forth. To a limited extend you can improve
 # security of read only slaves using 'rename-command' to shadow all the
 # administrative / dangerous commands.
 slave-read-only yes

 # Slaves send PINGs to server in a predefined interval. It's possible to change
 # this interval with the repl_ping_slave_period option. The default value is 10
 # seconds.
 #
 # repl-ping-slave-period 10

 # The following option sets a timeout for both Bulk transfer I/O timeout and
 # master data or ping response timeout. The default value is 60 seconds.
 #
 # It is important to make sure that this value is greater than the value
 # specified for repl-ping-slave-period otherwise a timeout will be detected
 # every time there is low traffic between the master and the slave.
 #
 # repl-timeout 60

 # The slave priority is an integer number published by Redis in the INFO output.
 # It is used by Redis Sentinel in order to select a slave to promote into a
 # master if the master is no longer working correctly.
 #
 # A slave with a low priority number is considered better for promotion, so
 # for instance if there are three slaves with priority 10, 100, 25 Sentinel will
 # pick the one wtih priority 10, that is the lowest.
 #
 # However a special priority of 0 marks the slave as not able to perform the
 # role of master, so a slave with priority of 0 will never be selected by
 # Redis Sentinel for promotion.
 #
 # By default the priority is 100.
 slave-priority 100

 ################################## SECURITY ###################################

 # Require clients to issue AUTH <PASSWORD> before processing any other
 # commands.  This might be useful in environments in which you do not trust
 # others with access to the host running redis-server.
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
 # 
 # Warning: since Redis is pretty fast an outside user can try up to
 # 150k passwords per second against a good box. This means that you should
 # use a very strong password otherwise it will be very easy to break.
 #
 # requirepass <null>

 # Command renaming.
 #
 # It is possible to change the name of dangerous commands in a shared
 # environment. For instance the CONFIG command may be renamed into something
 # of hard to guess so that it will be still available for internal-use
 # tools but not available for general clients.
 #
 # Example:
 #
 # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
 #
 # It is also possible to completely kill a command renaming it into
 # an empty string:
 #
 # rename-command CONFIG ""

 ################################### LIMITS ####################################

 # Set the max number of connected clients at the same time. By default
 # this limit is set to 10000 clients, however if the Redis server is not
 # able ot configure the process file limit to allow for the specified limit
 # the max number of allowed clients is set to the current file limit
 # minus 32 (as Redis reserves a few file descriptors for internal uses).
 #
 # Once the limit is reached Redis will close all the new connections sending
 # an error 'max number of clients reached'.
 #
 # maxclients 10000

 # Don't use more memory than the specified amount of bytes.
 # When the memory limit is reached Redis will try to remove keys
 # accordingly to the eviction policy selected (see maxmemmory-policy).
 #
 # If Redis can't remove keys according to the policy, or if the policy is
 # set to 'noeviction', Redis will start to reply with errors to commands
 # that would use more memory, like SET, LPUSH, and so on, and will continue
 # to reply to read-only commands like GET.
 #
 # This option is usually useful when using Redis as an LRU cache, or to set
 # an hard memory limit for an instance (using the 'noeviction' policy).
 #
 # WARNING: If you have slaves attached to an instance with maxmemory on,
 # the size of the output buffers needed to feed the slaves are subtracted
 # from the used memory count, so that network problems / resyncs will
 # not trigger a loop where keys are evicted, and in turn the output
 # buffer of slaves is full with DELs of keys evicted triggering the deletion
 # of more keys, and so forth until the database is completely emptied.
 #
 # In short... if you have slaves attached it is suggested that you set a lower
 # limit for maxmemory so that there is some free RAM on the system for slave
 # output buffers (but this is not needed if the policy is 'noeviction').
 #
 # maxmemory <bytes>

 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 # is reached? You can select among five behavior:
 # 
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key accordingly to the LRU algorithm
 # volatile-random -> remove a random key with an expire set
 # allkeys-random -> remove a random key, any key
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
 # 
 # Note: with all the kind of policies, Redis will return an error on write
 #       operations, when there are not suitable keys for eviction.
 #
 #       At the date of writing this commands are: set setnx setex append
 #       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
 #       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
 #       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
 #       getset mset msetnx exec sort
 #
 # The default is:
 #
 # maxmemory-policy volatile-lru

 # LRU and minimal TTL algorithms are not precise algorithms but approximated
 # algorithms (in order to save memory), so you can select as well the sample
 # size to check. For instance for default Redis will check three keys and
 # pick the one that was used less recently, you can change the sample size
 # using the following configuration directive.
 #
 # maxmemory-samples 3

 ############################## APPEND ONLY MODE ###############################

 # By default Redis asynchronously dumps the dataset on disk. This mode is
 # good enough in many applications, but an issue with the Redis process or
 # a power outage may result into a few minutes of writes lost (depending on
 # the configured save points).
 #
 # The Append Only File is an alternative persistence mode that provides
 # much better durability. For instance using the default data fsync policy
 # (see later in the config file) Redis can lose just one second of writes in a
 # dramatic event like a server power outage, or a single write if something
 # wrong with the Redis process itself happens, but the operating system is
 # still running correctly.
 #
 # AOF and RDB persistence can be enabled at the same time without problems.
 # If the AOF is enabled on startup Redis will load the AOF, that is the file
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.

 appendonly yes

 # The name of the append only file (default: "appendonly.aof")
 # appendfilename appendonly.aof

 # The fsync() call tells the Operating System to actually write data on disk
 # instead to wait for more data in the output buffer. Some OS will really flush 
 # data on disk, some other OS will just try to do it ASAP.
 #
 # Redis supports three different modes:
 #
 # no: don't fsync, just let the OS flush the data when it wants. Faster.
 # always: fsync after every write to the append only log . Slow, Safest.
 # everysec: fsync only one time every second. Compromise.
 #
 # The default is "everysec" that's usually the right compromise between
 # speed and data safety. It's up to you to understand if you can relax this to
 # "no" that will let the operating system flush the output buffer when
 # it wants, for better performances (but if you can live with the idea of
 # some data loss consider the default persistence mode that's snapshotting),
 # or on the contrary, use "always" that's very slow but a bit safer than
 # everysec.
 #
 # More details please check the following article:
 # http://antirez.com/post/redis-persistence-demystified.html
 #
 # If unsure, use "everysec".

 # appendfsync always
 appendfsync everysec
 # appendfsync no

 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
 # performing a lot of I/O against the disk, in some Linux configurations
 # Redis may block too long on the fsync() call. Note that there is no fix for
 # this currently, as even performing fsync in a different thread will block
 # our synchronous write(2) call.
 #
 # In order to mitigate this problem it's possible to use the following option
 # that will prevent fsync() from being called in the main process while a
 # BGSAVE or BGREWRITEAOF is in progress.
 #
 # This means that while another child is saving the durability of Redis is
 # the same as "appendfsync none", that in practical terms means that it is
 # possible to lost up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
 # 
 # If you have latency problems turn this to "yes". Otherwise leave it as
 # "no" that is the safest pick from the point of view of durability.
 no-appendfsync-on-rewrite no

 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
 # BGREWRITEAOF when the AOF log size will growth by the specified percentage.
 # 
 # This is how it works: Redis remembers the size of the AOF file after the
 # latest rewrite (or if no rewrite happened since the restart, the size of
 # the AOF at startup is used).
 #
 # This base size is compared to the current size. If the current size is
 # bigger than the specified percentage, the rewrite is triggered. Also
 # you need to specify a minimal size for the AOF file to be rewritten, this
 # is useful to avoid rewriting the AOF file even if the percentage increase
 # is reached but it is still pretty small.
 #
 # Specify a percentage of zero in order to disable the automatic AOF
 # rewrite feature.

 auto-aof-rewrite-percentage 100
 auto-aof-rewrite-min-size 64mb

 ################################ LUA SCRIPTING  ###############################

 # Max execution time of a Lua script in milliseconds.
 #
 # If the maximum execution time is reached Redis will log that a script is
 # still in execution after the maximum allowed time and will start to
 # reply to queries with an error.
 #
 # When a long running script exceed the maximum execution time only the
 # SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be
 # used to stop a script that did not yet called write commands. The second
 # is the only way to shut down the server in the case a write commands was
 # already issue by the script but the user don't want to wait for the natural
 # termination of the script.
 #
 # Set it to 0 or a negative value for unlimited execution without warnings.
 lua-time-limit 5000

 ################################## SLOW LOG ###################################

 # The Redis Slow Log is a system to log queries that exceeded a specified
 # execution time. The execution time does not include the I/O operations
 # like talking with the client, sending the reply and so forth,
 # but just the time needed to actually execute the command (this is the only
 # stage of command execution where the thread is blocked and can not serve
 # other requests in the meantime).
 # 
 # You can configure the slow log with two parameters: one tells Redis
 # what is the execution time, in microseconds, to exceed in order for the
 # command to get logged, and the other parameter is the length of the
 # slow log. When a new command is logged the oldest one is removed from the
 # queue of logged commands.

 # The following time is expressed in microseconds, so 1000000 is equivalent
 # to one second. Note that a negative number disables the slow log, while
 # a value of zero forces the logging of every command.
 slowlog-log-slower-than 10000

 # There is no limit to this length. Just be aware that it will consume memory.
 # You can reclaim memory used by the slow log with SLOWLOG RESET.
 slowlog-max-len 128

 ############################### ADVANCED CONFIG ###############################

 # Hashes are encoded using a memory efficient data structure when they have a
 # small number of entries, and the biggest entry does not exceed a given
 # threshold. These thresholds can be configured using the following directives.
 hash-max-ziplist-entries 512
 hash-max-ziplist-value 64

 # Similarly to hashes, small lists are also encoded in a special way in order
 # to save a lot of space. The special representation is only used when
 # you are under the following limits:
 list-max-ziplist-entries 512
 list-max-ziplist-value 64

 # Sets have a special encoding in just one case: when a set is composed
 # of just strings that happens to be integers in radix 10 in the range
 # of 64 bit signed integers.
 # The following configuration setting sets the limit in the size of the
 # set in order to use this special memory saving encoding.
 set-max-intset-entries 512

 # Similarly to hashes and lists, sorted sets are also specially encoded in
 # order to save a lot of space. This encoding is only used when the length and
 # elements of a sorted set are below the following limits:
 zset-max-ziplist-entries 128
 zset-max-ziplist-value 64

 # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
 # order to help rehashing the main Redis hash table (the one mapping top-level
 # keys to values). The hash table implementation Redis uses (see dict.c)
 # performs a lazy rehashing: the more operation you run into an hash table
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
 # 
 # The default is to use this millisecond 10 times every second in order to
 # active rehashing the main dictionaries, freeing memory when possible.
 #
 # If unsure:
 # use "activerehashing no" if you have hard latency requirements and it is
 # not a good thing in your environment that Redis can reply form time to time
 # to queries with 2 milliseconds delay.
 #
 # use "activerehashing yes" if you don't have such hard requirements but
 # want to free memory asap when possible.
 activerehashing yes

 # The client output buffer limits can be used to force disconnection of clients
 # that are not reading data from the server fast enough for some reason (a
 # common reason is that a Pub/Sub client can't consume messages as fast as the
 # publisher can produce them).
 #
 # The limit can be set differently for the three different classes of clients:
 #
 # normal -> normal clients
 # slave  -> slave clients and MONITOR clients
 # pubsub -> clients subcribed to at least one pubsub channel or pattern
 #
 # The syntax of every client-output-buffer-limit directive is the following:
 #
 # client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
 #
 # A client is immediately disconnected once the hard limit is reached, or if
 # the soft limit is reached and remains reached for the specified number of
 # seconds (continuously).
 # So for instance if the hard limit is 32 megabytes and the soft limit is
 # 16 megabytes / 10 seconds, the client will get disconnected immediately
 # if the size of the output buffers reach 32 megabytes, but will also get
 # disconnected if the client reaches 16 megabytes and continuously overcomes
 # the limit for 10 seconds.
 #
 # By default normal clients are not limited because they don't receive data
 # without asking (in a push way), but just after a request, so only
 # asynchronous clients may create a scenario where data is requested faster
 # than it can read.
 #
 # Instead there is a default limit for pubsub and slave clients, since
 # subscribers and slaves receive data in a push fashion.
 #
 # Both the hard or the soft limit can be disabled just setting it to zero.
 client-output-buffer-limit normal 0 0 0
 client-output-buffer-limit slave 256mb 64mb 60
 client-output-buffer-limit pubsub 32mb 8mb 60

 ################################## INCLUDES ###################################

 # Include one or more other config files here.  This is useful if you
 # have a standard template that goes to all Redis server but also need
 # to customize a few per-server settings.  Include files can include
 # other files, so use this wisely.
 #
 # include /path/to/local.conf
 # include /path/to/other.conf