Control NAD amplifier from LIRC
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Pete Shadbolt 66cb786c84 Add image 3 weeks ago
roles First commit 3 weeks ago
README.md Add image 3 weeks ago
bootstrap.yml First commit 3 weeks ago
parts.csv Add parts, PCB, and README 3 weeks ago
pcb.zip Add parts, PCB, and README 3 weeks ago

README.md

LIRC/Ansible configuration for NAD amplifier

These configuration files were pulled from a much larger configuration and might not work out of the box in isolation, but hopefully can be helpful.

Assumes that an infrared LED is connected to the Raspberry Pi on GPIO pin 17. KiCAD files for a shield PCB are included in pcb.zip. I tried using a commercial IR hat but it didn't work - it used a different pin which interfered with my sound card. A DigiKey parts list is included in parts.csv.

This is for a NAD SR712 amplifier. Configuration files for other devices can be found here. If you can't find the settings for your device you can try to reverse engineer the infrared protocol, I did this successfully for an unusual projector using an oscilloscope - it is possible!

Image